Do lightsaber blades and/or blaster bolts cast shadows? (I know it's possible to see a blade's shadow on the ground during Episode VI, but that was clearly due to technical limitations, not intentional.) I'd appreciate an answer that lines up with the canon, please.

  • 15
    I would think not since they cast a light of their own. Commented May 8, 2018 at 16:14
  • 42
    @DarthVader Being a light-casting entity doesn't preclude you from casting a shadow. Commented May 8, 2018 at 21:57
  • 6
    Why do people think that plasma is transparent?? Plasma is made of excited gas and it is in fact opaque to light at the frequencies that it emits. Commented May 10, 2018 at 16:13
  • 4
    @GhotiandChips Obviously! Otherwise, Jedi wouldn't be able to fall to the Dark Side! ;) Commented May 10, 2018 at 21:21
  • 2
    @DarthVader Actually, humans really do literally glow light, which should have been another tip that emitting light does not preclude an object from casting a shadow. Commented May 10, 2018 at 21:47

6 Answers 6


From this image from Episode I would appear that they do cast shadows, though the angles don't look quite right to me.

Qui-Gon Jinn vs Darth Maul

From Season 1 Episode 14 of Star Wars: The Clone Wars, "Defenders of Peace", Ahsoka's lightsaber clearly casts a shadow. This is animated and so is not the result of a mistake on post production forgetting to remove a prop's shadow.

Ahsoka cuts down some droids

The above example comes from the verified Facebook page Star Wars: The Clone Wars and has the following description (emphasis mine).

When Ahsoka cuts down droids inside the Separatist base in season one episode Defenders of Peace, she is shown in silhouette and her lightsaber casts a shadow. Contrary to online debate, there's nothing wrong with this. Lightsabers do indeed cast shadows; anything that is opaque does. Try it with a fluorescent light tube.

Blaster bolts on the other hand would appear not to cast a shadow as we see when Kylo Ren halts a blaster bolt in Episode VII.

Kylo Ren halts a blaster bolt

Again in Episode II there appear to be no shadows coming off of the blaster bolts.

Droids fire on the drop ships

Some out of universe reasoning here is that the bolts are added in with effects whereas the lightsaber blades are full props used in the fighting and so will cast a shadow.

  • 10
    If there were a sufficiently bright enough source of light above the blaster bolt, it might have casted a shadow. Since this occured at night time, there simply wasn't enough light for a shadow to be created. Out of universe, you can see the actor on the right has a shadow from a backlight. Commented May 8, 2018 at 16:34
  • 2
    I bet that the shadow's weird angles are because they use a green screen and the lighting came from a different angle than what the in universe sun would have. Commented May 8, 2018 at 17:09
  • 2
    The shadows are from them using broomstick handles for lightsabers in the prequels. Commented May 8, 2018 at 20:30
  • 2
    @GhotiandChips whereas the lightsaber blades are full props used in the fighting and so will cast a shadow.
    – TheLethalCarrot
    Commented May 9, 2018 at 7:52
  • 2
    "This is animated and so is not the result of a mistake on post production forgetting to remove a prop's shadow." That's not necessarily the case, depending on how the scene was created (technology and production process). They might actually have created the shadows the same way you'd have done it with actual props; Have them stand before an actual light source and record the shadows cast on the wall. The animator could easily have made the light sabers not cast any shadows of course, but it's entirely possible they didn't think too hard about whether or not they should.
    – Cubic
    Commented May 9, 2018 at 9:57

If we assume that lightsabers and blaster bolts are some kind of plasma, they should cast a shadow under the right circumstances. Stars are big balls of plasma and one star can block the light of another, such as in an eclipsing binary. Flames, which include a small amount of plasma, can also cast shadows, either by absorbing some of the light or refracting it due to currents of heated air.

Image of the shadow of a flame from Robert Frost's Quora answer.
Quora, Why doesn't a fire or a flame cast a shadow, while other things around it do? If there is no shadow, does it mean light can pass through it, even though flame is not transparent?

Shadows are formed when there is something between a distant light source and a surface blocks some of the light. However, if the object blocking the light, like a lightsaber, is emitting light itself, the shadow will only be obvious if the distant light source is much brighter than the light-emitting object.

Plasma strongly absorbs light, but also strongly emits light. However, if you have a strong enough light source, you should be able to see a shadow from a lightsaber or blaster bolt.

  • 13
    Not only brightness, also color plays a big part! A red lightsaber will cat a shadow in a room with blue lights - most of the room will be blue the surroundings of the lightsaber will be violet and the shadow will be red.
    – Falco
    Commented May 9, 2018 at 6:33
  • 9
    What does any of this have to do with the star wars universe? This is totally unrelated to the canon, and wrong as proven by the answer below. Furthermore, the OP has clearly asked for an in-universe, canon answer.
    – Edlothiad
    Commented May 9, 2018 at 7:55
  • 3
    @Edlothiad Which answer below? The one with in-universe photos proving that they do cast shadows, or the ones with the assumptions and guesses?
    – Mr Lister
    Commented May 9, 2018 at 12:42
  • 2
    The one with the strong canon backing, while the conclusion above may have been "They might cast some shadows", the method it used to reach there is off-topic to the question and in my opinion, to the site.
    – Edlothiad
    Commented May 9, 2018 at 12:51
  • 2
    They don't cast shadows in the three movies that matter. But they should've. +1
    – Mazura
    Commented May 9, 2018 at 17:08

In Legends a lightsaber wasn't really the same thing as a blaster bolt. In fact, in Legends the explanations of lightsabers have changed from source to source. One interesting example I will link, at 3:35 it shows that lightsabers are far more solid than just magnetically contained plasma. This would support the shadows seen in the films and shows as more than just a result of the limitations in filming.

Blaster bolts have always been described as plasma and would likely obey the rules of our known science and not cast a shadow unless particularly outshone by another light source. I can't think of any visual examples of this.

  • Hello and welcome to SFF! This is a decent answer (would be better if it was Disney canon of course). However, it would be better if you could include the relevant parts of the video into your answer, I don't want to watch a 5 minute video to look for a 1 second clip of a shadow. Lastly, don't forget to take the tour
    – TheLethalCarrot
    Commented May 9, 2018 at 14:41
  • @TheLethalCarrot The timestamp appears to be included in the answer already. The description of what happens at that point could be a little clearer, but it looks okay to me.
    – F1Krazy
    Commented May 9, 2018 at 14:45
  • @F1Krazy Somehow missed the timestamp, edited the link to start at the right point now though :)
    – TheLethalCarrot
    Commented May 9, 2018 at 14:47
  • I don't think this shows solidity, just the strength of the forces keeping the beam intact (along with Satele's starwars.wikia.com/wiki/Tutaminis ability). Commented May 10, 2018 at 22:56
  • @Mathew-Read, Its the way the blade begins to crack or at least react to the amount of force being applied that doesn't appear to be just a magnetically contained plasma. I don't think pure energy would crack like that. It's the only time I've seen anything like it and it's not really canon anymore, so take it with a grain of salt.
    – Roy
    Commented May 11, 2018 at 14:36

There would be many factors involved. Mainly the intensity of secondary light source that is hitting the blaster bolt or blade, distance to surface that a potential shadow would be cast upon, the direction of travel from the light source (is it focused in one direction or being cast out in all directions), as well as the frequency of the light from the source, the blade, and/or the blaster bolt.

This link talks about how any light source that contains mass is technically able to have a shadow when certain criteria are met. All that is needed to create a shadow is to block or redirect light.

So technically the answer would be yes assuming that a lightsaber blade or blaster bolt is more than just a source of light but actually plasma or some other form of matter undergoing a reaction. But to get further into an explanation of the exact requirements to cause this shadow, one would have to make assumptions about the intensity and frequency of both a lightsaber blade and a blaster bolt. So the answer is absolutely that yes, they would in the right situation cast a shadow but attempting to determine that right situation is not scientifically possible without an actual real world example.

  • Hello and welcome to SFF! This seems to be merely a yes answer with not much evidence, do you have any to add? Lastly, don't forget to take the tour!
    – TheLethalCarrot
    Commented May 8, 2018 at 19:07
  • 1
    edited answer to include reference.
    – jedicurt
    Commented May 8, 2018 at 19:37

Lightsabers are Plasma beams and have almost no mass. explained here But I have very little knowledge of how plasma and light interact.

The out of universe answer is that they used props of solid objects therefor casting a shadow.

I would guess that a lightsaber might have the capacity to cast a shadow, if the light it's casting is much less the light it's blocking.

Edit: There is a helpful explanation on plasma here

  • 8
    Your link is to a google search. And "we have very little knowledge of how plasma and light interact." seems like a strange claim to make, plasma is very well understood.
    – Yakk
    Commented May 8, 2018 at 20:19
  • 3
    "we have very little knowledge of how plasma and light interact." ??? What? It's a false statement. Commented May 8, 2018 at 20:31
  • I meant that I have little knowledge, but I miss spoke. @GhotiandChips Commented May 9, 2018 at 0:49
  • 5
    You don’t need to know much about the interaction of plasma and light. There is a simple rule of thumb: if you can’t look through it, it can cast a shadow.
    – Holger
    Commented May 9, 2018 at 6:22

I think that neither lightsabers, nor blaster bolts cast dense shadows, but they may and probably do cast a poor shadow. Why I think so? Take for instance a laser from real life, it won't cast a dense shadow since most light will go through it. A lightsabers will probably block some of the light too, but most of it will go through.

  • 2
    This may be a better answer if it read as an answer. Though I don't really see what it adds on to what is already here.
    – TheLethalCarrot
    Commented May 9, 2018 at 10:28
  • 3
    Lasers don't cast shadows at all. You need to get way to the gamma range to get any measurable interaction between photons, visible light just isn't anywhere near energetic enough. Plasma is very different - it both absorbs and emits light readily (thanks to all those free electrons).
    – Luaan
    Commented May 9, 2018 at 12:27
  • 1
    @Luaan My shop laser casts a barely seen shadow, so your statement is wrong. Commented May 9, 2018 at 13:03
  • 5
    Really? How did you measure that? And why do you think the laser casts the shadow? If there is any real optical effect (and not just an illusion), it probably has to do with how the laser interacts with the air in the room - most likely by changing the optical properties of the air, causing light to bend and producing areas of higher brightness and correspondingly lower brightness - not casting a shadow. Unless you consider lenses concentrating (or dispersing) light as casting shadows.
    – Luaan
    Commented May 9, 2018 at 13:52
  • Blaster bolts in Star Wars are ionized plasma, not lasers.
    – TylerH
    Commented May 10, 2018 at 14:46

Not the answer you're looking for? Browse other questions tagged or ask your own question.